2022 C5 Manufacturing Chisholm Trail Bale Bed Other
Item Location
GREENBRIER VALLEY EQUIPMENT CO., LLC.
www.gvecllc.com
gvequipmentco@gmail.com
430 Maplewood Ave
Lewisburg, WV, 24901
(304) 645-1486
Stock No: SO
Our Price: Call For Price
Condition: | new |
Year: | 2022 |
Manufacturer: | C5 Manufacturing |
Model: | Chisholm Trail Bale Bed |
Request More Info
2022 C5 Manufacturing Chisholm Trail Bale Bed Other
Please enter your contact information and one of our representatives will get back to you with more information.
Get a Quote
Please enter your contact information and one of our representatives will get back to you with more information.
OVERVIEW
The Chisholm Trail Bale Bed has two features that no other bale bed has. First, all Chisholm Trail Bale Beds have independent arm control, a switch for both the left and right arm. This unique feature allows side-to-side shifting of a bale and the ability to rotate a bale on the ground for quicker loading. Secondly, Chisholm Trail Bale Beds can dump if equipped with that option. This turns your bale bed into a dump bed with a 6,000-pound dump capability. No other bale bed on the market offers either of these options, let alone both.
Standard Features
Unique Dump
The Chisholm Trail Bale Bed's unique dump feature expands your capabilities to handle hay and dump materials from the comfort of your cab. There is no other unit on the market like it. Arm lift capacity is 2,850 pounds and bed dump capacity is 6,000 pounds.
Independent Arm Action The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly--- round, square, wide or narrow. You can haul up to four 4' rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4' by 8' square bale end-to-end or from the side. The arm range on dual wheel trucks of 3'6" to 9'6" enables you to grab small or misshapen items as well.
Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.
Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.
No-Need-to-Jack Trailers
The Chisholm Trail Bale Bed makes work easier and quicker in so many ways, especially hooking up your gooseneck trailer. Just raise the bed until the jack stand is off the ground, store the jack, lower the bed, and off you go. No more cranking!
Additional Features
Electric-over-hydraulic heavy duty 4 gpm power unit
LED work lights that work on a switch in the cab
Tethered hand control
Additional set of stop/turn lights in the headache rack
Heavy duty 2 x 4 x 3/16" rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety
2-5/16", 30,000 pound rated hitch ball with 1" rise, recessed in the bed with door closure
H-frame stabilizer system
1/8" Tread plate floor with component access doors -- no door hinges! Access door for all working components under the bed including fluid fill door.
Mud flaps
LED running lights throughout the bed and a pair of resistors to accommodate the low voltage lights (no flashing of lights due to computer error)
Four 3 x 20 lift cylinders
Two 2 x 6 squeeze cylinders
350 Amp fuse and fuse block system
Grab handles on each side of the headache rack
D-ring tie down rings on each side of the bed
Two-part urethane paint for more durability and shine
Sizes
The Chisholm Trail Bale Bed is available in six different sizes:
37N Dump Flatbed
7' wide x 7'4" long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5" cab to axle measurement.
42N Bale Bed
7' wide x 7'8" long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42" cab to axle measurement.
56N Bale Bed
7' wide x 8'10" long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56" cab to axle measurement.
60N Bale Bed
7' wide x 9'10" long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60" cab to axle measurement.
37w Dump Flatbed
8' wide x 7'4" long
The 37w bed fits dual wheel trucks with a very short bed. It has a 37.5" cab to axle measurement.
42w Bale Bed
8' wide x 7'8" long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42" cab to axle measurement.
56W Bale Bed
8' wide x 8'10" long
The 56W bed fits a dually bed truck. It has dual wheels and a 56" cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.
60W Bale Bed
7'8" wide x 9'10" long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60" cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.
84WBale Bed
8' wide x 11'10" long
The 84W bed fits dual wheel trucks with 84" cab to axle measurement.
null
Item Location
GREENBRIER VALLEY EQUIPMENT CO., LLC.
www.gvecllc.com
gvequipmentco@gmail.com
430 Maplewood Ave
Lewisburg, WV, 24901
(304) 645-1486
Stock No: SO
Our Price: Call For Price
Condition: | new |
Year: | 2022 |
Manufacturer: | C5 Manufacturing |
Model: | Chisholm Trail Bale Bed |
Request More Info
2022 C5 Manufacturing Chisholm Trail Bale Bed Other
Please enter your contact information and one of our representatives will get back to you with more information.
Get a Quote
Please enter your contact information and one of our representatives will get back to you with more information.